.

Wednesday 31 August 2011

RISE OF THE PLANET APES



Nội dung chính của bộ phim là "nguồn gốc" theo đúng nghĩa của nó ."Rise of the Planet of Apes" lấy bối cảnh ở thời hiện đại tại San Francisco, nơi mà những thí nghiệm của loài người cùng với những nghiên cứu về di truyền học đã tạo bước đà cho sự phát triển trí thông minh của loài khỉ và sự khơi mào cuộc chiến tranh để chiếm lấy quyền tối cao. Cuối cùng dẫn đến ngày tận thế toàn cầu, và biến Trái đất trở thành Hành tinh của Khỉ giả nhân.

Tuesday 30 August 2011

Cách viết mail tiếng Anh

Cách viết mail tiếng Anh
Đây là một kỹ năng không thể thiếu trong tiếng anh,nó rất quan trong khi bạn bạn làm việc với người nước ngoài.
Bản chất của việc viết email cũng là viết thư. Viết thư có 2 loại văn phong: Trang trọng và Thân mật. Trong giao tiếp thương mại, các bạn nên dùng văn phong trang trọng. Hình thức trình bày thư cũng có nhiều cách phụ thuộc vào mục đích công việc. Ví dụ: Thư chúc mừng, Thư cảm ơn, Thư phàn nàn, Thư chào hàng… Mỗi loại thư có mẫu câu riêng. Tuy nhiên, điểm chung cho các loại thư này là từ đầu đến cuối tuyệt đối không viết tắt, trình bày ngắn gọn trực tiếp vào vấn đề và thể hiện sự tôn trọng người đọc.

1. Khi bạn viết phần lời chào của thư, bạn cần phải dùng từ Dear Sir/Madam/Mr. A/Ms. B/Sir or Madam. Có một số trường hợp bạn sẽ phải viết Dr. X hay Prof. D...

2. Mở đầu thư, bạn nên viết lời cảm ơn và tham chiếu cho bức thư mình đang viết. Ví dụ: “Thank you very much for your call this morning”, hay “With reference to your advertisement on ....

3. Trong nội dung thư, bạn không nên viết tắt. Ví dụ: bạn nên viết “I do not”, không nên viết “I don’t”.

4. Viết lý do bạn viết bức thư này. Ví dụ: I am writing to you to confirm our order...". Hay viết lời đề nghị mà bạn mong muốn. Ví dụ: "I would be grateful if you could include a brochure...”. Còn rất nhiều lý do khác nữa để mở đầu một bức thư, bạn có thể tìm hiểu thêm ở một số sách hoặc tham gia khoá học tại MEC Vietnam để biết thêm các cách viết thư chuẩn đa dạng khác nhau.

5. Văn phong trịnh trọng (formal style) hay dùng câu “I would like..., I would be...” thay cho từ “I want..., I will be...

6. Cuối thư bạn nên viết thêm thông tin nếu cần liên hệ thêm. Ví dụ: “Should you need further information, please feel free to contact...”, “I look forward to meeting you at...”, Thank you for your prompt help...”

7. Kết thúc bức thư bạn nên sử dụng những lời chào như: “Yours sincerely”, “Your faithfully”

8. Cuối cùng, bạn sẽ viết tên của bạn, chức danh, liên hệ...

9. Một điều không thể quên đó là bạn cần phải lưu lại bức thư mà mình đã gửi đi để tham khảo lại sau này.


Trước hết, phải tuân thủ nguyên tắc trình bày thư đã quen thuộc với hầu hết người nước ngoài, đó là thứ tự và căn chỉnh các đoạn. Để tránh rườm rà, hãy thực hiện căn trái toàn bộ nội dung, dùng font chữ chân phương, chẳng hạn Times New Roman (13 points). Bên trên cùng, ghi địa chỉ liên lạc và số điện thoại của bạn, sau đó đến ngày viết thư, rồi tên người nhận.

Nội dung thư được trình bày trong diện tích còn lại của trang A4, nên ngắn gọn, rõ ràng.

Văn phong tiếng Anh có đặc thù là đi vào mục đích chính ngay khi mở đầu nội dung. Vì vậy, bạn nên “đặt tên” thư bằng một dòng in nghiêng, mở đầu bởi từ dẫn Reference, ví dụ: Re: Salesman post (Dự tuyển vị trí nhân viên bán hàng). Chú ý, câu này sẽ được sắp xếp ngay sau địa chỉ người nhận và trước khi bắt đầu trình bày thư.

Tổ chức nội dung thư có nhiều cách khác nhau và còn tuỳ thuộc vào các yếu tố: kiến thức cá nhân của người viết, yêu cầu của nhà tuyển dụng. Tuy nhiên, để tránh lan man, chỉ nên gói gọn lại trong 3 đoạn, lần lượt nói về nguyên nhân đăng ký thi tuyển, những hiểu biết về chuyên môn của bạn và một số điểm mạnh cá nhân (thông minh, nhanh nhẹn, sẵn sàng công tác xa...).

Kết thúc thư, hãy khẳng định với nhà tuyển dụng rằng bạn mong muốn được gặp trực tiếp họ trong một buổi intervew (I am looking forward to an intervew at your office).

Dưới đây là một mẫu khá thông dụng để bạn tham khảo:

Nguyen Van Nam

6 Lang Trung, Dong Da, Ha Noi
Tel: 090-260448
May 10, 2001

ABCD Enterprise
Attn: Human Resources Manager
Re: Salesman post

Dear Sir,

In reply to your advertisement in the Newspaper, I am pleased to enclose my C.V to apply for the Salesman position of your office in HCMC.
From my C.V, you will see that, I graduated from Foreign Trade University with a good bachelor degree. I have a good command of Vietnam economic and social situation, and I am confident in doing business.
At present, I am working for....
In addition, I am active and enthusiastic. I am willing to learn and do what takes to get a job done well even under pressure or on far mission.

I am looking forward to an interview at your office.


Yours faithfully,

Nguyen Van Nam

E-MAIL

Many people enjoy sending an receiving e-mail, especially if they share a common interest. Writing e-mails to a friend in English allows you as much time as you need to write the message and look up any words or grammar that you don't know. If you are paying for each minute that you are connected to the internet, you may want to write e-mails while you are not connected and then connect just to type the message and send it.

E-mails are usually written in a less formal style than letters. It is common to start an e-mail with the name of the person you are writing to, without starting with the word "Dear". The following are examples of some appropriate ways to start and end an e-mail:

(1) Writing to your partner
Start: Use the person's first name or nickname
Ending: "Take care", or "Love", or "Thinking of you"
Signature: Your first name, or nickname

(2) Writing to a friend
Start: Use the person's first name
Ending: "Best wishes", or "Yours", or "Take care"
Signature: Your first name

(3) Writing to someone in your own company
Start: Use the person's first name (in a few companies you might need to be more formal, but this is rare in the UK)
Ending: "Regards", or "Best wishes"
Signature: Your first name and last name, and below this your job title and department, and phone number (or extension)

(4) Writing to someone in another organisation or someone in a formal position of responsibility
Start: Use the person's title (eg: Mr, Mrs, Ms, Dr) and surname (eg: Smith), or just "Sir/Madam" if you don't know the name
Ending: "Regards"
Signature: Your first name and last name (you might add your title after this in brackets if you want to make it clear if you are a man or woman). Below this your job title (if appropriate) and contact details (you may want to include your telephone number or address)

Lưu ý:

Đối với những lá thư gửi đến người cùng trang lứa ví dụ như bạn thân, bạn không cần phải quá khách sáo, có thể lược bỏ Dear. Có thể dùng những từ sau đây, đặc biệt cho e-mail thăm hỏi hơn là thư tín.

Hello, Chào,

Hello John, Chào John,

Hi! /Hi, (Chào! /Chào,)

Hi John! Chào John!

John, John,

Những lỗi thường gặp khi viết lời chào đầu thư:

Dear Sir, Thưa ông,
Lời chào này tạo ấn tượng rằng người nhận thư là đàn ông, nghe có vẻ phân biệt nam nữ. Vì vậy, thay vào đó bạn nên dùng Dear Sir or Madam, hoặc To whom it may concern,.

Dear Ms. Mary White, Hay Dear Mary White, (Mary White thân mến,)
Ta chỉ cần viết Dear Ms. White, hoặc Dear Mary, chứ không cần viết đầy đủ cả họ và tên.

2. Lời chào cuồi thư (Complimentary closings)

Một số lời chào cuối thư thường được viết như sau :

Yours truly, /Yours sincerely, /Yours, /Sincerely, /Very truly yours, (Kính thư,)

Best wishes, (Chúc mọi sự tốt lành,)

Love, (Thân mến,)

See you! /See ya! (Hẹn gặp lại!)

All for now, (Bây giờ xin dừng bút,)

Write soon! (Hãy sớm trả lời thư nhé!)

Good-bye for now, (Bây giờ xin chào tạm biệt nhé,)

Bye for now! (Bây giờ tạm biệt nhé!)

Later, (Hẹn lần sau,)

Bye-bye, (Tạm biệt,)

Talk to you later, (Lần sau nói tiếp,)
Lưu ý:

Lời chào đầu thư và lời chào cuối thư phải phù hợp và thống nhất với nhau và với nội dung bức thư về văn phong, mức độ trang trọng hay thân mật.

Ngoài những bức thư tình ra, nam giới sẽ không viết Love, cho lời chào cuối thư. Nhưng nữ giới có thể dùng lời chào này cho người mà mình có thiện cảm hoặc người thân thiết. Đối với các thư tín thương mại thường dùng lời chào cuối thư rất lịch sự như : Yours truly, /Yours sincerely, /Yours, / Sincerely, (Kính thư,)

Trong những bức thư gửi bạn bè, lời chào cuối thư như trên nhiều khi không cần thiết. Nếu là e-mail thì có nhiều điều được bỏ bớt. Những ví dụ sau đây được viết khi muốn lá thư có vẻ thân thiện hơn, mang tính chất riêng tư, cụ thể hơn. Tuy nhiên bên dưới vẫn phải ký tên (nếu là e-mail thì phải đánh máy tên.)

Hoping to hear from you soon. (Hy vọng sớm nhận được tin của bạn.)

Look forward to seeing you next week. (Mong gặp bạn vào tuần sau.)

I have to go to work now. I will write again. (Tôi phải đi làm bây giờ. Tôi sẽ viết lần nữa.)

That’s all I have time to write now. (Bây giờ tôi viết như thế là đủ rồi.)

I’m too sleepy to write any more. (Tôi buồn ngủ quá không thể viết thêm nữa.)

I’d better sign off now. (Tốt hơn tôi nên dừng bút bây giờ. )

Mẫu viết email bằng tiếng anh (hot)

Tiếng việt hay tiếng anh thì viết email hay viết thư cũng cần có form.
Hôm nay mình sẽ giới thiệu với các bạn mẫu của một email
dù viết thư tiếng việt hay tiếng anh thì cũng cần
Nó thể hiện sự trang trọng

Dream Mr/Ms/sir/adam,Name(người mình muốn gửi)
-Đầu thư thường chào và hỏi thăm sức khỏe,và NHững lời chúc.
Hello,How are you?I hope that everything well goes with you.
-Lý do viết thư
reason why you write an this email......
Ex:I'm writing this email to you because.....
-Nhắn Người ta sớm hồi âm
hope to see you very soon "hy vọng sẽ sớm gặp bạn"
or
I'm looking forwalk to seeing you as soon as possible
-có thể gửi lời chúc tới gia đình hoặc công ty họ...
Please,sand my best regard to your parents
or
Please,my love to your parents.
- Nói với họ Giữ liên lạc
keep in touch!
Kết thúc email
.......,
tên bạn

.... có thể là:all the best or best regard or warm regard or best wishes
or Love(chỉ dùng với bạn bè hoặc người yêu hay người mình thích)

chú ý.Viết email Thường căn Lề trái văn bản.

Booting an EX Series Switch Using a Software Package Stored on a USB Flash Drive

Booting an EX Series Switch Using a Software Package Stored
on a USB Flash Drive

There are two methods of getting Junos OS onto a USB
flash drive before using the software to boot the switch. You can
pre-install the software onto the USB flash drive before inserting
the USB flash drive into the USB port, or you can use the system snapshot
feature to copy files from internal switch memory to the USB flash
drive.

To move files into USB flash memory using a system snapshot
and use those files to boot the switch, see Creating a Snapshot and Using It to Boot an EX Series Switch. We recommend that you use this method to boot the switch from a
USB flash drive if your switch is running properly.

If you need to pre-install the software onto the USB flash drive,
you can use the method described in this topic. Pre-installing the
Junos OS onto a USB flash drive to boot the switch can be done at
any time and is particularly useful when the switch boots to the loader
prompt because the switch cannot locate the Junos OS in internal flash
memory.

Ensure that you have the following tools and parts
available to boot the switch from a USB flash drive:

  • A USB flash drive that meets the EX Series switch USB
    port specifications. See USB Port Specifications for an EX Series Switch.
  • A computer or other device that you can use to download
    the software package from the Internet and copy it to the USB flash
    drive.

To download a Junos OS package onto a USB flash drive
before inserting the USB flash drive:

  1. Download the Junos OS package that you would
    like to place onto the EX Series switch from the Internet onto the
    USB flash drive using your computer or other device. See Downloading Software Packages from Juniper Networks.
  2. Remove the USB flash drive from the computer or
    other device.
  3. Insert the USB flash drive into the USB port on
    the switch.
  4. This step can only be performed when the prompt
    for the loader script (loader>) is displayed. The loader
    script starts when the Junos OS loads but the CLI is not working for
    any reason or if the switch has no software installed.

    Install the software package onto the switch:

    loader> install source

    where source represents the name and location of the Junos OS package on
    the USB flash drive. The Junos OS package on a flash drive is commonly
    stored in the root drive as the only file—for example, file:///jinstall-ex-4200-9.4R1.5-domestic-signed.tgz.

Recovering from a Failed Software Upgrade on an EX Series Switch

Troubleshooting Software Installation

Recovering from a Failed Software Upgrade on an EX Series Switch

Problem

If the Junos
OS loads but the CLI is not working for any reason, or if the switch
has no software installed, you can use this recovery installation
procedure to install the Junos OS.

Solution

If there is already a Junos OS image on the system,
you can either install the new Junos OS package in a separate partition
and have both Junos OS images remain on the system, or you can wipe
the disk clean before the new installation proceeds.

If there is no Junos OS image on the system, follow the instructions
in Booting an EX Series Switch Using a Software Package Stored on a USB Flash Drive to get an
image on the system and boot the switch.

To perform a recovery installation:

  1. Power on the switch. The loader script starts.

    After the message Loading /boot/defaults/loader.conf displays, you are prompted with:

    Hit [Enter] to boot immediately, or space bar for command
    prompt.

  2. Press the space bar to enter the manual loader.
    The loader> prompt displays.
  3. Enter the following command:
    loader> install [– –format] [–
    –external] source

    where:

    • format—Use this option to wipe the installation
      media before installing the software package. If you do not include
      this option, the system installs the new Junos OS package in a different
      partition from the partition used by the most recently installed Junos
      OS package.
    • external—Use this option to install the
      software package on an external media.
    • source—Represents the name and location
      of the Junos OS package either on a server on the network or as a
      file on the USB flash drive:
      • Network address of the server and the path on the server;
        for example, tftp://192.17.1.28/junos/jinstall-ex-4200-9.4R1.5-domestic-signed.tgz
      • The Junos OS package on a USB device is commonly stored
        in the root drive as the only file; for example, file:///jinstall-ex-4200-9.4R1.5-domestic-signed.tgz

    The boot process proceeds as normal and ends with a login
    prompt.

Rebooting from the Inactive Partition

Problem

An
EX Series switch ships with the Junos OS loaded on the system disk
in partition 1. The first time you upgrade, the new software package
is installed in partition 2. When you finish the installation and
reboot, partition 2 becomes the active partition. Similarly, subsequent
software packages are installed in the inactive partition which becomes
the active partition when you reboot at the end of the installation
process.

If you performed an upgrade and rebooted, the system resets
the active partition. You can use this procedure to manually boot
from the inactive partition.

Note:
If you have completed the installation of the software
image but have not yet rebooted, you can issue the request system
software rollback
command to return to the original software
installation package.

Solution

Reboot from the inactive partition:

user@switch> request system reboot partition
alternate

Note:
If you cannot access the CLI, you can reboot from the
inactive partition using the following procedure from the loader script
prompt:

  1. Unload and clear the interrupted boot from
    the active partition:
    loader> unloadloader> unset vfs.root.mountfrom
  2. Select the new (inactive) partition to
    boot from:
    loader> set currdev=diskmediaspartition:

    where media is either
    0 (internal) or 1 (external) and partition indicates the partition number, either 1 or 2.

    You must include the colon (:) at the end of this command.

  3. Boot the Junos OS from the inactive partition:
    loader> boot

Freeing Up Disk Space for Software Installation

Problem

The
software installation process requires a certain amount of unused
disk space. If there is not enough space, you might receive an error
message such as:

fetch: /var/tmp/incoming-package.tgz: No space left on device

Solution

Identify and delete unnecessary files by using the request system storage cleanup command.

Reverting to the Default Factory Configuration for the EX Series Switch

Reverting to the Default Factory Configuration for the EX Series Switch

If for any reason the current active configuration fails, you can revert to the default factory configuration. You can also roll back to a previous configuration, as described in Loading a Previous Configuration File (CLI Procedure), or revert to the rescue configuration, as described in Reverting to the Rescue Configuration for the EX Series Switch.

The default factory configuration contains the basic configuration settings. This is the first configuration of the switch and it is loaded when the switch is first installed and powered on.

You can revert to the default factory configuration by using the Menu button to the right of the LCD on the front panel of the switch or by using the load factory-default configuration command.

Reverting to the Default Factory Configuration by Using the LCD Panel
Reverting to the Default Factory Configuration by Using the load factory-default Command
Reverting to the Default Factory Configuration by Using the LCD Panel
To set the switch to the default factory configuration, use the LCD panel and buttons on the front panel of the switch as shown in Figure 1. If the switch model does not have an LCD panel, use the CLI command described in the following section.

Use the LCD panel to revert to the default factory configuration if you want to run EZsetup. When you use the CLI to revert to the default factory configuration, the configuration for the root password is retained and you cannot run EZSetup.

Figure 1: EX Series Switch LCD Panel



Note: If you want to convert an EX4200 or EX4500 switch from a member of a multimember Virtual Chassis configuration to a standalone switch, first disconnect the cables connected to the Virtual Chassis ports (VCPs). See Disconnecting a Virtual Chassis Cable from an EX4200 Switch or Disconnecting a Virtual Chassis Cable from an EX4500 Switch. The Menu button procedure deletes all modified configuration parameters, including Virtual Chassis parameters such as member ID, mastership priority, and setting of VCP uplinks.

To revert to the default factory configuration by using the LCD panel:

Press the Menu button until you see MAINTENANCE MENU on the panel.
Press the Enter button.
Press Menu until you see FACTORY DEFAULT.
Press Enter. The display says RESTORE DEFAULT?
Press Enter. The screen flashes FACTORY DEFAULT IN PROGRESS and returns to the idle menu.
Reverting to the Default Factory Configuration by Using the load factory-default Command
The load factory-default command is a standard Junos OS configuration command. Issuing this configuration command replaces the current active configuration with the default factory configuration.

Use the LCD panel to revert to the default factory configuration if you want to run EZSetup. When you use the CLI to revert to the default factory configuration, the configuration for the root password is retained and you cannot run EZSetup.


Note: The load factory-default command by itself is not supported on EX4200 and EX4500 switches configured in a Virtual Chassis with multiple members. In a multimember Virtual Chassis configuration, you can revert to the default factory configuration while retaining the Virtual Chassis parameters (member ID, mastership priority, or settings of VCP uplinks) using the load factory-default CLI command.

To revert to the default factory configuration by using the load factory-default command:

[edit]
user@switch# load factory-default
[edit]
user@switch# delete system commit factory-settings
[edit]
user@switch# set system root-authentication plain-text-password
[edit]
user@switch# commit
Check the member ID and mastership priority with the show virtual-chassis status command and check to see whether there are remaining settings for uplink VCPs by using the show virtual-chassis vc-port command.

How to Re-install JunOS to a Juniper EX4200 Switch

How to Re-install JunOS to a Juniper EX4200 Switch
Written by Sam Caldwell
Tuesday, 22 March 2011 19:01
Problem Statement:
After misconfiguring a Juniper EX4200 Ethernet Switch, the device was reset to factory defaults, and rebooted. During reboot the system failed to restart, hanging at the "Loading JunOS..." screen on its LCD screen. This appears to indicate the JunOS image is corrupt and must be reinstalled, according to Juniper support
Solution:
(1) Determine the appropriate JunOS image:
(a) If the device will be used with another device as a part of a Virtual Chassis, then determine the JunOS version of the other device(s) to be connected to the same virtual chassis.
(b) If the device is to be used as a stand-alone device, then choose the latest stable JunOS version with the appropriate features required.
(2) Download the JunOS image (.tar.gz) from support.juniper.net using your juniper credentials.
(3) Format a USB stick with the FAT32 file system.
(4) Copy the JunOS image to the USB Stick.
(5) Insert the USB stick into the USB port on the switch.
(6) Connect via console port to the switch.
(7) Power on the switch.
(8) Stop the boot process in the loader prompt by pressing [spacebar] when it says "loading kernel."
(9) Type the command "install --format and press [enter].